Fortinet black logo

FortiGate-7060E System Guide

Chassis hardware information

Copy Link
Copy Doc ID 5bada950-1a11-11e9-9685-f8bc1258b856:683751
Download PDF

Chassis hardware information

This section introduces FortiGate-7060E hardware components and accessories including power requirements and FIM and FPM modules that can be installed in the chassis.

Shipping components

The FortiGate-7060E chassis ships pre-assembled with the following components:

  • The 8U FortiGate-7060E chassis.
  • Two FIM modules.
  • Up to four FPM modules.
  • Two System Management Modules (SMMs) in the front of the chassis. (SMMs are not field replacable. If a SMM fails, you must RMA the chassis. The chassis will continue to operate with one or no operating SMM.)
  • Four Power Supply Units (PSUs) installed in the front of the chassis.
  • Three cooling fan trays installed in the back of the chassis.
  • One protective front panel installed in the chassis to protect internal chassis components. This panel must be removed before installing FIM and FPM modules.
  • Six FIM and FPM blank panels that can be installed in empty chassis slots. The blank panels are part of the chassis package and all blank panels should be kept available in case an FIM or FPM needs to be removed from the chassis.
  • Four power cords with C15 power connectors.
  • Six power cord management clamps.
  • One set of 4-post rack mounting components.
  • One set of 2-post rack mounting components.
  • One pair of cable management side brackets.
  • Two front mounting brackets.
  • Twenty-four M4x6 flat-head screws.
  • Six M4x8 large head pan-head screws.
  • Six rubber feet.
  • Two USB to RJ-45 RS-232 console cables.
  • One RJ-45 Ethernet cable.

Optional accessories and replacement parts

The following optional accessories can be ordered separately:

SKU Description
FG-7060E-FAN FortiGate-7060E fan tray.
FG-7060E-PS-AC 1500W AC power supply units (PSUs) for the FortiGate-7060E.
FG-7060E-PS-DC 1500W DC power supply units (PSUs) for the FortiGate-7060E.
FG-7060E-CHASSIS FortiGate-7060E chassis including 2x SMM, 3x fan trays, and 4x AC or DC PSUs.

You can also order the following:

  • Additional FIM and FPM modules
  • Transceivers
  • DC PSUs (Each PSU ships with a set of two 8 AWG DC power cables and six extra DC terminal rings. The cables are 3 meters (9.84 ft.) long. You can use the DC terminal rings to make custom DC cables.)
  • Air Filter kit
  • FPM and FIM single slot cover trays to be installed in empty chassis slots

The following optional accessories can be ordered separately:

  • Additional FIM and FPM modules
  • Transceivers
  • DC PSUs
  • Additional AC PSUs
  • Additional FAN trays
  • Air Filter kit
  • FPM and FIM blank panels to be installed in empty chassis slots

Physical description of the FortiGate-7060E chassis

The FortiGate-7060E chassis is a 8U chassis that can be installed in a standard 19-inch rack. The following table describes the physical characteristics of the FortiGate-7060E chassis.

Dimensions (H x W x D) 14.0 x 17.3 x 25.6 in (352.7 x 440 x 650 mm)
Chassis weight completely assembled with FIM and FPM modules installed 207.2 lbs (94.1 kg)
Operating Temperature 32 to 104°F (0 to 40°C)
Storage Temperature -31 to 158°F (-35 to 70°C)
Relative Humidity 10% to 90% non-condensing
Noise Level 63db
AC Input Current and Voltage Range 10-12 A, 100 to 240 VAC (50 to 60 Hz)
DC Input Rating Average: 12.5A@48V for each PSU, max 44A
Power Support Rating max. 3277W
Supplied Power Supply Units (PSUs) 4 (for 3+1 redundancy)
Max Power Supply Units (PSUs) 6 (for 3+3 redundancy)
Previous
Next

Chassis hardware information

This section introduces FortiGate-7060E hardware components and accessories including power requirements and FIM and FPM modules that can be installed in the chassis.

Shipping components

The FortiGate-7060E chassis ships pre-assembled with the following components:

  • The 8U FortiGate-7060E chassis.
  • Two FIM modules.
  • Up to four FPM modules.
  • Two System Management Modules (SMMs) in the front of the chassis. (SMMs are not field replacable. If a SMM fails, you must RMA the chassis. The chassis will continue to operate with one or no operating SMM.)
  • Four Power Supply Units (PSUs) installed in the front of the chassis.
  • Three cooling fan trays installed in the back of the chassis.
  • One protective front panel installed in the chassis to protect internal chassis components. This panel must be removed before installing FIM and FPM modules.
  • Six FIM and FPM blank panels that can be installed in empty chassis slots. The blank panels are part of the chassis package and all blank panels should be kept available in case an FIM or FPM needs to be removed from the chassis.
  • Four power cords with C15 power connectors.
  • Six power cord management clamps.
  • One set of 4-post rack mounting components.
  • One set of 2-post rack mounting components.
  • One pair of cable management side brackets.
  • Two front mounting brackets.
  • Twenty-four M4x6 flat-head screws.
  • Six M4x8 large head pan-head screws.
  • Six rubber feet.
  • Two USB to RJ-45 RS-232 console cables.
  • One RJ-45 Ethernet cable.

Optional accessories and replacement parts

The following optional accessories can be ordered separately:

SKU Description
FG-7060E-FAN FortiGate-7060E fan tray.
FG-7060E-PS-AC 1500W AC power supply units (PSUs) for the FortiGate-7060E.
FG-7060E-PS-DC 1500W DC power supply units (PSUs) for the FortiGate-7060E.
FG-7060E-CHASSIS FortiGate-7060E chassis including 2x SMM, 3x fan trays, and 4x AC or DC PSUs.

You can also order the following:

  • Additional FIM and FPM modules
  • Transceivers
  • DC PSUs (Each PSU ships with a set of two 8 AWG DC power cables and six extra DC terminal rings. The cables are 3 meters (9.84 ft.) long. You can use the DC terminal rings to make custom DC cables.)
  • Air Filter kit
  • FPM and FIM single slot cover trays to be installed in empty chassis slots

The following optional accessories can be ordered separately:

  • Additional FIM and FPM modules
  • Transceivers
  • DC PSUs
  • Additional AC PSUs
  • Additional FAN trays
  • Air Filter kit
  • FPM and FIM blank panels to be installed in empty chassis slots

Physical description of the FortiGate-7060E chassis

The FortiGate-7060E chassis is a 8U chassis that can be installed in a standard 19-inch rack. The following table describes the physical characteristics of the FortiGate-7060E chassis.

Dimensions (H x W x D) 14.0 x 17.3 x 25.6 in (352.7 x 440 x 650 mm)
Chassis weight completely assembled with FIM and FPM modules installed 207.2 lbs (94.1 kg)
Operating Temperature 32 to 104°F (0 to 40°C)
Storage Temperature -31 to 158°F (-35 to 70°C)
Relative Humidity 10% to 90% non-condensing
Noise Level 63db
AC Input Current and Voltage Range 10-12 A, 100 to 240 VAC (50 to 60 Hz)
DC Input Rating Average: 12.5A@48V for each PSU, max 44A
Power Support Rating max. 3277W
Supplied Power Supply Units (PSUs) 4 (for 3+1 redundancy)
Max Power Supply Units (PSUs) 6 (for 3+3 redundancy)
Previous
Next