Fortinet black logo

FortiGate-7060E System Guide

Turning on FortiGate-7060E chassis power

Copy Link
Copy Doc ID 5bada950-1a11-11e9-9685-f8bc1258b856:585491
Download PDF

Turning on FortiGate-7060E chassis power

Connect AC or DC power to PSUs 1, 2, 3, and 4. Once the FortiGate-7060E chassis is connected to power the chassis powers up. If the chassis is operating correctly, the LEDs on the PSUs and fans should be lit. As well, the LEDs on the SMMs should be lit.

When the chassis first starts up you should also hear the cooling fans operating.

In addition, if any modules have been installed in the chassis they should power on and their front panel LEDs should indicate that they are starting up and operating normally.

Previous
Next

Turning on FortiGate-7060E chassis power

Connect AC or DC power to PSUs 1, 2, 3, and 4. Once the FortiGate-7060E chassis is connected to power the chassis powers up. If the chassis is operating correctly, the LEDs on the PSUs and fans should be lit. As well, the LEDs on the SMMs should be lit.

When the chassis first starts up you should also hear the cooling fans operating.

In addition, if any modules have been installed in the chassis they should power on and their front panel LEDs should indicate that they are starting up and operating normally.

Previous
Next