Fortinet black logo

FortiGate-7030E System Guide

FortiGate-7030E front panel

Copy Link
Copy Doc ID 496f257b-1a0a-11e9-9685-f8bc1258b856:891505
Download PDF

FortiGate-7030E front panel

The FortiGate-7030E chassis is managed by a single System Management Module (SMM) that includes an Ethernet connection as well as two switchable console ports that provide console connections to the modules in the chassis slots. The SMM controls chassis cooling and power management and provides an interface for managing the modules installed in the chassis. The standard configuration of the FortiGate-7030E includes one FIM (interface) module in chassis slot 1 and two FPM (processing) modules in chassis slots 3 and 4. The front panel also includes a sealed blank panel. Breaking the seal or removing the panel voids your warranty. Two versions of the FortiGate-7030E are available:

  • FortiGate-7030E QSFP28 and includes one FIM-7920E and two FPM-7620Es
  • FortiGate-7030E SFP10G and includes one FIM-7901E and two FPM-7620Es
FortiGate-7030E front panel (FortiGate-7030E-SFP10G model)

Note Do not operate the FortiGate-7030E chassis with open slots on the front or back panel. For optimum cooling performance and safety, each chassis slot must contain an FIM or FPM or an FIM or FPM blank panel (also called a dummy card). For the same reason, all cooling fan trays, power supplies or power supply slot covers must be installed while the chassis is operating.
Previous
Next

FortiGate-7030E front panel

The FortiGate-7030E chassis is managed by a single System Management Module (SMM) that includes an Ethernet connection as well as two switchable console ports that provide console connections to the modules in the chassis slots. The SMM controls chassis cooling and power management and provides an interface for managing the modules installed in the chassis. The standard configuration of the FortiGate-7030E includes one FIM (interface) module in chassis slot 1 and two FPM (processing) modules in chassis slots 3 and 4. The front panel also includes a sealed blank panel. Breaking the seal or removing the panel voids your warranty. Two versions of the FortiGate-7030E are available:

  • FortiGate-7030E QSFP28 and includes one FIM-7920E and two FPM-7620Es
  • FortiGate-7030E SFP10G and includes one FIM-7901E and two FPM-7620Es
FortiGate-7030E front panel (FortiGate-7030E-SFP10G model)

Note Do not operate the FortiGate-7030E chassis with open slots on the front or back panel. For optimum cooling performance and safety, each chassis slot must contain an FIM or FPM or an FIM or FPM blank panel (also called a dummy card). For the same reason, all cooling fan trays, power supplies or power supply slot covers must be installed while the chassis is operating.
Previous
Next