FGSP with LAG session synchronization interfaces
The FortiGate-7000F supports using a LAG for FGSP session synchronization to provide redundancy and load sharing. You can create an aggregate of 100G interfaces using the M1 and M2 interfaces of both FIMs. You can also create an aggregate of 10G interfaces using the M3 and M4 interfaces of both FIMs. Choose the interfaces to for the LAG depending on your session synchronization bandwidth requirements and the other uses you might have for the M1 to M4 interfaces.
Example LAG configuration using the M1 interfaces of both FIMs.
config system interface
edit sess-sync-lag
set vdom mgmt-vdom
set ip 10.1.1.1 255.255.255.0
set type aggregate
set member 1-M1 2-M1
end
Example cluster sync configuration:
config system cluster-sync
edit 1
set peervd mgmt-vdom
set peerip 10.1.1.2
set syncvd <vdoms >
end
Example HA configuration:
config system ha
set session-pickup enable
set session-pickup-connectionless enable
set session-pickup-expectation enable
set session-pickup-nat enable
end