Front panel LEDs
| LED | State | Description |
|---|---|---|
| STATUS | Off | The FortiGate 6000F is powered off. |
| Green | The FortiGate 6000F is powered on and operating normally. | |
| Flashing Green | The FortiGate 6000F is starting up. | |
| ALARM | Red | Major alarm. One or more analog sensors have surpassed a critical or non-recoverable (NR) threshold causing an alarm. When a critical threshold has been reached, it means that a condition has been detected that has surpassed an operating tolerance. For example, a temperature has increased above the allowed operating temperature range. |
| Amber | Minor alarm. One or more analog sensors (excluding PSUs) has surpassed a major or critical (CR) threshold. Any sensor, including sensors on PSUs, has generated an alert. Sensor alert criteria is defined per sensor. For analog sensors, alerts usually mean passing an upper critical (UC) or lower critical (LC) threshold. For other sensors, an alert could mean a flag bit is indicating an anomaly. | |
| Off | No alarms | |
| HA | Off | The FortiGate 6000F is operating in normal mode. |
| Green | The FortiGate 6000F is operating in HA mode. | |
| Red | The FortiGate 6000F is operating in HA mode and the HA heartbeat cannot find the other FortiGate 6000F in the HA cluster. | |
| PWR | Off | The FortiGate 6000F is powered off. |
| Green | The FortiGate 6000F is powered on and operating normally. | |
| 1 to 24 Link/Activity |
Green | This interface is connected at 25Gbps /10Gbps /1Gbps with the correct cable and the attached network device has power. |
| Flashing Green | Network traffic on this interface. | |
| Off | No link is established. | |
| 25 to 28 Link/Activity |
Green | This interface is connected at 100Gbps /40Gbps with the correct cable and the attached network device has power. |
| Flashing Green | Network traffic on this interface. | |
| Off | No Link | |
| MGMT1 MGMT2 Link/ Activity (Left LED) | Green | This interface is connected at 1Gbps or 100Mbps with the correct cable and the attached network device has power. |
| Flashing Green | Network traffic on this interface. | |
| Off | No link is established. | |
| MGMT1 MGMT2 Speed (Right LED) | Green | This interface is connected at 1Gbps. |
| Amber | This interface is connected at 100Mbps | |
| Off | No link is established. | |
| MGMT3 Link/ Activity (Left LED) | Green | This interface is connected at 10Gbps or 1Gbps with the correct cable and the attached network device has power. |
| Flashing Green | Network activity at the interface. | |
| Off | No link is established. | |
| MGMT3 (Right LED) | Not used. | |
| HA1 HA2 Link/Activity | Green | This interface is connected at 10Gbps or 1Gbps with the correct cable and the attached network device has power |
| Flashing Green | Network activity at the interface. | |
| Off | No link is established. | |