FortiGate-6000F System Guide
Surface-mount installation
Surface-mount installation
- Make sure that the surface onto which the FortiGate 6000F is to be installed is clean, level, and stable and that there is at least 100 mm of front and back clearance to allow for adequate cooling air flow.
- Attach the six provided rubber feet to the bottom of the FortiGate 6000F.
- Place the FortiGate 6000F in the designated location.
- Verify that the spacing around the FortiGate 6000F conforms to requirements and that the FortiGate 6000F is level.
Surface-mount installation
- Make sure that the surface onto which the FortiGate 6000F is to be installed is clean, level, and stable and that there is at least 100 mm of front and back clearance to allow for adequate cooling air flow.
- Attach the six provided rubber feet to the bottom of the FortiGate 6000F.
- Place the FortiGate 6000F in the designated location.
- Verify that the spacing around the FortiGate 6000F conforms to requirements and that the FortiGate 6000F is level.