FortiGate-6000 supports the Fortinet Security Fabric and all Security Fabric related features including Security Rating. To fully support the Security Fabric, you must switch the FortiGate-6000 to operate in Split-Task VDOM mode.
In both VDOM modes, the Security Fabric must be enabled for normal SLBC operation. See Multi VDOM mode and the Security Fabric for details.
Begin setting up the Security Fabric for your FortiGate-6000 by going to Security Fabric > Fabric Connectors and adding a FortiAnalyzer. Once the FortiAnalyzer is added, you can continue configuring the Security Fabric in the same way as any FortiGate device. The FortiGate-6000 can serve as the Security Fabric root or join an existing fabric. For more information see Fortinet Security Fabric. When setting up a Security Fabric that includes FortiGate-6000s:
- The root FortiGate must have a Fabric name (also called a group name). You can use the default Fabric name (SLBC) or change it to a custom name.
- A non-root FortiGate can have a different or blank fabric name as long as the non-root FortiGate is authorized by the root FortiGate.
- When you add a FortiGate-6000 to an existing fabric, some of the Security Fabric topologies show the FPCs as individual components in the topology. On the root FortiGate you only need to authorize the FortiGate-6000 management board. All of the FPCs are then automatically authorized.
- You can click on any FPC and select Login to log into that component using the special management port number.
- When adding a FortiGate-6000 to an existing security fabric, you must manually add a FortiAnalyzer to the FortiGate-6000 configuration. This is required because the default FortiGate-6000 security fabric configuration has
local, so the FortiGate-6000 doesn't get security fabric configuration settings, such as the FortiAnalyzer configuration, from the root FortiGate.