Fortinet black logo

FortiGate-6000 Handbook

Home FortiGate-6000 6.2.6 FortiGate-6000 Handbook

SSD failure

6.2.6
7.0.15
7.0.14
7.0.13
7.0.12
7.0.10
7.0.5
6.4.15
6.4.14
6.4.13
6.4.12
6.4.10
6.4.8
6.4.6
6.4.2
6.2.16
6.2.16
6.2.15
6.2.13
6.2.12
6.2.11
6.2.10
6.2.9
6.2.7
6.2.6
6.2.4
6.2.3
6.0.18
6.0.17
6.0.16
6.0.15
6.0.14
6.0.13
6.0.12
6.0.10
6.0.9
6.0.8
6.0.6
6.0.4
5.6.14
5.6.12
5.6.11
5.6.7
5.4.10
Copy Link
Copy Doc ID 70e69783-b387-11eb-b70b-00505692583a:338297
Download PDF

SSD failure

FortiGate-6501F or 6301F HA clusters support SSD (log disk) failure protection. SSD failure protection is disabled by default. You can use the following command to enable SSD failure protection:

config system ha

set ssd-failover enable

end

If SSD failure detection is enabled, if an SSD on the primary FortiGate-6501F or 6301F fails, an HA failover occurs and the FortiGate-6501F or 6301F with the most operating SSDs becomes the primary.

If an SSD fails on the secondary FortiGate-6501F or 6301F, its status in the cluster does not change. However, in future negotiations the FortiGate-6501F or 6301F with an the most SSD failures is less likely to become the primary.

Previous
Next

SSD failure

FortiGate-6501F or 6301F HA clusters support SSD (log disk) failure protection. SSD failure protection is disabled by default. You can use the following command to enable SSD failure protection:

config system ha

set ssd-failover enable

end

If SSD failure detection is enabled, if an SSD on the primary FortiGate-6501F or 6301F fails, an HA failover occurs and the FortiGate-6501F or 6301F with the most operating SSDs becomes the primary.

If an SSD fails on the secondary FortiGate-6501F or 6301F, its status in the cluster does not change. However, in future negotiations the FortiGate-6501F or 6301F with an the most SSD failures is less likely to become the primary.

Previous
Next