Fortinet black logo

Administration Guide

Integration Devices

Copy Link
Copy Doc ID 5e5f427d-b811-11eb-92d0-00505692583a:732297
Download PDF

Integration Devices

FortiDeceptor on FortiGate Security Fabric topology map

Security Fabric integration allows FortiDeceptor and deception decoys to be visible through the Fabric network topology map.

Use Fabric > Integration Devices to configure the integration between FortiDeceptor and FortiGate for Security Fabric.

To configure the integration between FortiDeceptor and FortiGate for Security Fabric:
  1. In FortiDeceptor, go to Use Fabric > Integration Devices.
  2. In the Fabric Upstream section, select Enabled.
  3. Enter the FortiGate IP address in Upstream IP Address and the FortiGate connector port in Port.

  4. In FortiGate, log in as an admin and go to Security Fabric > Fabric Connectors.
  5. Add the FortiDeceptor connector for this integration.

  6. In FortiGate, go to Security Fabric > Physical Topology to verify that the FortiDeceptor is on the topology map.

  7. In FortiGate, go top Dashboard > Status to view FortiDeceptor information and deception decoys configuration status.

FortiDeceptor integration for threat response mitigation

Use Fabric > Integration Devices to view and configure FortiGate and other device settings for integration with FortiDeceptor. Integration uses REST APIs, XML APIs, or webhooks. When decoys are accessed, FortiDeceptor makes quarantine calls and attackers are immediately quarantined on the device for further analysis.

The following information is displayed:

Action

Click Edit to edit the integration settings.

Click Delete to delete the device.

Enabled

Shows if the device is enabled or disabled.

Status

Device status.

Name

Alias of the integrated device.

Integrate Method

The integration method of this device:

  • FGT-REST_API
  • FGT-WEBHOOK
  • PAN-XMLAPI
  • GEN-WEBHOOK (FortiNAC can be integrated via GEN-WEBHOOK)

Severity

Security level. The selected level and all levels above it are blocked. For example, if you select Medium, then when any attack reaches medium, high, or critical levels, the attacker IP address is blocked. If you select Critical, then only the critical level is blocked.

Detail

Device integration details.

To integrate a device:
  1. Go to Fabric > Integration Devices.
  2. Click Quarantine Integration With New Device.
  3. Configure the device for integration. Then click Save.

    Enabled

    Enable or disable this device.

    Name

    Specify a name for this device.

    Block Severity

    The selected level and all levels above it are blocked. For example, if you select Medium, then when any attack reaches medium, high, or critical levels, the attacker IP address is blocked. If you select Critical, then only the critical level is blocked.

    Appliance

    Option for Central Management manager device to integrate the incidents from the specified appliances only.

    Integrate Method

    The integration method of this device:

    • FGT-REST_API
    • FGT-WEBHOOK
    • PAN-XMLAPI
    • GEN-WEBHOOK (FortiNAC can be integrated via GEN-WEBHOOK)

    Different integration methods have different settings.

    IP or Device IP

    IP address of the integrated device.

    Port

    Port number of the integrated device API service. Default is 443.

    Username and Password

    Username and password of the integrated device.

    VDOM

    For FortiGate devices, the default access VDOM.

    Expiry

    Default blocking time in second. Default is 3600 seconds.

Integration Devices

FortiDeceptor on FortiGate Security Fabric topology map

Security Fabric integration allows FortiDeceptor and deception decoys to be visible through the Fabric network topology map.

Use Fabric > Integration Devices to configure the integration between FortiDeceptor and FortiGate for Security Fabric.

To configure the integration between FortiDeceptor and FortiGate for Security Fabric:
  1. In FortiDeceptor, go to Use Fabric > Integration Devices.
  2. In the Fabric Upstream section, select Enabled.
  3. Enter the FortiGate IP address in Upstream IP Address and the FortiGate connector port in Port.

  4. In FortiGate, log in as an admin and go to Security Fabric > Fabric Connectors.
  5. Add the FortiDeceptor connector for this integration.

  6. In FortiGate, go to Security Fabric > Physical Topology to verify that the FortiDeceptor is on the topology map.

  7. In FortiGate, go top Dashboard > Status to view FortiDeceptor information and deception decoys configuration status.

FortiDeceptor integration for threat response mitigation

Use Fabric > Integration Devices to view and configure FortiGate and other device settings for integration with FortiDeceptor. Integration uses REST APIs, XML APIs, or webhooks. When decoys are accessed, FortiDeceptor makes quarantine calls and attackers are immediately quarantined on the device for further analysis.

The following information is displayed:

Action

Click Edit to edit the integration settings.

Click Delete to delete the device.

Enabled

Shows if the device is enabled or disabled.

Status

Device status.

Name

Alias of the integrated device.

Integrate Method

The integration method of this device:

  • FGT-REST_API
  • FGT-WEBHOOK
  • PAN-XMLAPI
  • GEN-WEBHOOK (FortiNAC can be integrated via GEN-WEBHOOK)

Severity

Security level. The selected level and all levels above it are blocked. For example, if you select Medium, then when any attack reaches medium, high, or critical levels, the attacker IP address is blocked. If you select Critical, then only the critical level is blocked.

Detail

Device integration details.

To integrate a device:
  1. Go to Fabric > Integration Devices.
  2. Click Quarantine Integration With New Device.
  3. Configure the device for integration. Then click Save.

    Enabled

    Enable or disable this device.

    Name

    Specify a name for this device.

    Block Severity

    The selected level and all levels above it are blocked. For example, if you select Medium, then when any attack reaches medium, high, or critical levels, the attacker IP address is blocked. If you select Critical, then only the critical level is blocked.

    Appliance

    Option for Central Management manager device to integrate the incidents from the specified appliances only.

    Integrate Method

    The integration method of this device:

    • FGT-REST_API
    • FGT-WEBHOOK
    • PAN-XMLAPI
    • GEN-WEBHOOK (FortiNAC can be integrated via GEN-WEBHOOK)

    Different integration methods have different settings.

    IP or Device IP

    IP address of the integrated device.

    Port

    Port number of the integrated device API service. Default is 443.

    Username and Password

    Username and password of the integrated device.

    VDOM

    For FortiGate devices, the default access VDOM.

    Expiry

    Default blocking time in second. Default is 3600 seconds.