Verifying ports and services and connection between EMS and FortiClient
Ports and services
On the EMS server, run the following CLI command to verify the services are bound to a port:
sudo lsof -nP -i:8013
|
Option |
Description |
|---|---|
|
-n |
Do not convert port numbers to port names. |
|
-p |
Do not resolve hostnames, show numerical addresses. |
|
-i |
Initiates the network file filter. |
The following shows that EMS Linux is listening to port TCP/8013 on a particular interface: 192.168.1.22 in this case. The PID is 113194 and command is ecsocksrv.
