Configuring FortiGuard settings

1. Go to System Settings > FortiGuard.
2. Configure the following options:

   Server Location		Configure FortiGuard server location to Nearest or US. If you select Nearest, FortiClient EMS connects to the FortiGuard server whose IP address the DNS server provides. If you select US, FortiClient EMS can only connect to FortiGuard servers available in the United States and does not attempt to access a FortiGuard server outside the U.S.
   Use FortiManager for client software/signature updates		Turn on to use FortiManager or Micro-FortiGuard Server for FortiClient for updating FortiClient software or signatures. You must specify the IP address or hostname for FortiManager or Micro-FortiGuard Server for FortiClient as well as the port number.
   	IP address/Hostname	Enter the IP address/hostname.
   	Port	Configure the port number.
   	Failover port	Configure the failover port.
   	Timeout	Configure the timeout interval (in seconds).
   	Failover	Enable failover to FDN when FortiManager or Micro-FortiGuard Server for FortiClient is not available.

3. Click Save.