Fortinet black logo

Special notices

Special notices

Using Web Filter and Real Time Protection with FortiClient (macOS)

When using FortiClient (macOS), Web Filter and Real Time Protection may not function properly unless you take the following steps:

  1. Reboot the Mac in recovery mode by holding down the Command and R keys.
  2. Go to Utilities and start the Terminal.
  3. Issue the spctl kext-consent disable command.
  4. Reboot the machine.
  5. In the Terminal, enter the kextstat command. The FortiClient module com.fortinet.fct.kext.avkern2/fctapnke should be listed. The Web Filter and Real Time Protection features should function as configured.

For the source of this solution, see Apple Support.

If using MDM with an Enterprise solution, note the FortiClient team ID is AH4XFXJ7DK.

Special notices

Using Web Filter and Real Time Protection with FortiClient (macOS)

When using FortiClient (macOS), Web Filter and Real Time Protection may not function properly unless you take the following steps:

  1. Reboot the Mac in recovery mode by holding down the Command and R keys.
  2. Go to Utilities and start the Terminal.
  3. Issue the spctl kext-consent disable command.
  4. Reboot the machine.
  5. In the Terminal, enter the kextstat command. The FortiClient module com.fortinet.fct.kext.avkern2/fctapnke should be listed. The Web Filter and Real Time Protection features should function as configured.

For the source of this solution, see Apple Support.

If using MDM with an Enterprise solution, note the FortiClient team ID is AH4XFXJ7DK.