Filtering the list of endpoints

You can filter the list of endpoints displayed on the Endpoints content pane.

Go to Endpoints.
Click All Domains, a domain, or workgroup.
The list of endpoints displays.

Click the Filters menu, and set filters.

The filter options display.

For text values, you can use a comma (,) to separate values and an exclamation mark (!) to exclude a value.

For buttons, hover the mouse over each button to view its tooltip.

Device		Lists the filter options for devices.
	Name	Enter the name(s) to include in the filter. You can exclude a name or names from the filter using an exclamation mark (!).
	User	Enter the name of the user(s) to include in the filter. You can exclude a name or names from the filter using an exclamation mark (!).
	Group	Enter the name of the group(s) to include in the filter. You can also exclude a name or names from the filter using an exclamation mark (!).
	IP	Enter the IP address to include in the filter. You can exclude an IP address from the filter using an exclamation mark (!).
	OS	Enter the name of the operating system(s) to include in the filter. You can exclude a name or names from the filter using an exclamation mark (!).
FortiClient		Lists the filter options for FortiClient version numbers.
	Version	Enter the FortiClient version number to include in the filter. You can exclude a version or versions from the filter using an exclamation mark (!).
Installer		Lists the filter options for deployment.
	Name	Enter the name(s) of the installer to include in the filter. You can exclude a name or names from the filter using an exclamation mark (!).
	Status	Click one or more deployment status buttons to include in the filter. Selected status buttons are green. Hover the mouse over each button to view its tooltip. Clear the status button to exclude the status from the filter. Excluded status buttons are gray.
	More States	Click to display additional statuses to include in the filter.
Profile
	Name	Enter the name(s) of the profile to include in the filter. You can also exclude a name or names from the filter by using an exclamation mark (!).
	Status	Click the profile status to include in the filter. Selected status buttons are green. Choose between Synced and Out-Of-Sync. Clear the status button to exclude the status from the filter. Excluded status buttons are gray.
Gateway List
	Name	Enter the name(s) of the gateway IP list to include in the filter. You can also exclude a name or names from the filter by using an exclamation mark (!).
	Status	Click the gateway IP list status to include in the filter. Selected status buttons are green. Choose between Synced and Out-Of-Sync. Clear the status button to exclude the status from the filter. Excluded status buttons are gray.
FortiTelemetry
	Serial	Select the FortiGate serial number to include in the filter.
	Status	Click the status for FortiClient Telemetry connection to FortiGate to include in the filter. Choose between Online, Offline, and Not Registered.
EMS
	Status	Click the status for FortiClient Telemetry connection to EMS to include in the filter. Selected status buttons are green. Choose between Online, Offline, and Not Registered. Clear the status button to exclude the status from the filter. Excluded status buttons are gray.
Status		Click the compliance status to include in the filter. Selected status buttons are green. Choose between Compliant, Not Compliant, Not Participating, Quarantined, Excluded, Not Registered, Not Installed. Clear the status button to exclude the status from the filter. Excluded status buttons are gray.
Events		Select the events to include in the filter. The selected checkboxes beside the events are included in the filter. Clear the checkbox beside the event to exclude the event from the filter.
Bookmarks		Displays the list of saved filter settings. Displays only after you have saved a bookmark. Click the Bookmark button to name and save filter settings. Click a bookmark to use the saved settings. Click the x beside a bookmark to delete it.
Search		Click the Search button to apply the filter setting.
Reset		Click the Reset button to clear the filter settings.
Bookmark		Click the Bookmark button to save the filter settings as a bookmark.

Click Search.
The filtered list of endpoints displays.
Click Reset to clear the filter settings.

Filtering the list of endpoints

You can filter the list of endpoints displayed on the Endpoints content pane.

Go to Endpoints.
Click All Domains, a domain, or workgroup.
The list of endpoints displays.

Click the Filters menu, and set filters.

The filter options display.

For text values, you can use a comma (,) to separate values and an exclamation mark (!) to exclude a value.

For buttons, hover the mouse over each button to view its tooltip.

Device		Lists the filter options for devices.
	Name	Enter the name(s) to include in the filter. You can exclude a name or names from the filter using an exclamation mark (!).
	User	Enter the name of the user(s) to include in the filter. You can exclude a name or names from the filter using an exclamation mark (!).
	Group	Enter the name of the group(s) to include in the filter. You can also exclude a name or names from the filter using an exclamation mark (!).
	IP	Enter the IP address to include in the filter. You can exclude an IP address from the filter using an exclamation mark (!).
	OS	Enter the name of the operating system(s) to include in the filter. You can exclude a name or names from the filter using an exclamation mark (!).
FortiClient		Lists the filter options for FortiClient version numbers.
	Version	Enter the FortiClient version number to include in the filter. You can exclude a version or versions from the filter using an exclamation mark (!).
Installer		Lists the filter options for deployment.
	Name	Enter the name(s) of the installer to include in the filter. You can exclude a name or names from the filter using an exclamation mark (!).
	Status	Click one or more deployment status buttons to include in the filter. Selected status buttons are green. Hover the mouse over each button to view its tooltip. Clear the status button to exclude the status from the filter. Excluded status buttons are gray.
	More States	Click to display additional statuses to include in the filter.
Profile
	Name	Enter the name(s) of the profile to include in the filter. You can also exclude a name or names from the filter by using an exclamation mark (!).
	Status	Click the profile status to include in the filter. Selected status buttons are green. Choose between Synced and Out-Of-Sync. Clear the status button to exclude the status from the filter. Excluded status buttons are gray.
Gateway List
	Name	Enter the name(s) of the gateway IP list to include in the filter. You can also exclude a name or names from the filter by using an exclamation mark (!).
	Status	Click the gateway IP list status to include in the filter. Selected status buttons are green. Choose between Synced and Out-Of-Sync. Clear the status button to exclude the status from the filter. Excluded status buttons are gray.
FortiTelemetry
	Serial	Select the FortiGate serial number to include in the filter.
	Status	Click the status for FortiClient Telemetry connection to FortiGate to include in the filter. Choose between Online, Offline, and Not Registered.
EMS
	Status	Click the status for FortiClient Telemetry connection to EMS to include in the filter. Selected status buttons are green. Choose between Online, Offline, and Not Registered. Clear the status button to exclude the status from the filter. Excluded status buttons are gray.
Status		Click the compliance status to include in the filter. Selected status buttons are green. Choose between Compliant, Not Compliant, Not Participating, Quarantined, Excluded, Not Registered, Not Installed. Clear the status button to exclude the status from the filter. Excluded status buttons are gray.
Events		Select the events to include in the filter. The selected checkboxes beside the events are included in the filter. Clear the checkbox beside the event to exclude the event from the filter.
Bookmarks		Displays the list of saved filter settings. Displays only after you have saved a bookmark. Click the Bookmark button to name and save filter settings. Click a bookmark to use the saved settings. Click the x beside a bookmark to delete it.
Search		Click the Search button to apply the filter setting.
Reset		Click the Reset button to clear the filter settings.
Bookmark		Click the Bookmark button to save the filter settings as a bookmark.

Click Search.
The filtered list of endpoints displays.
Click Reset to clear the filter settings.

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

EMS Administration Guide

Filtering the list of endpoints

Filtering the list of endpoints

Filtering the list of endpoints

Filtering the list of endpoints