Fortinet black logo

Administration Guide

Enabling Sandbox Detection

Enabling Sandbox Detection

If you have a FortiSandbox unit, you can enable FortiClient to work with FortiSandbox.

To enable Sandbox Detection:
  1. On the Malware Protection tab, click the settings icon.
  2. If the Administrative privileges are required to change settings. Press Elevate to obtain these privileges. message displays, click Elevate.

    The settings page displays.

  3. Toggle Sandbox Detection on if needed.
  4. In the IP box, type the IP address for FortiSandbox, and click Test to ensure the IP address is valid.

    If the IP address is valid, a confirmation dialog box displays.

  5. Click OK to close the confirmation dialog box.

    For information about configuring FortiSandbox, see Configuring Sandbox Detection.

    FortiSandbox Detection is enabled.

Enabling Sandbox Detection

If you have a FortiSandbox unit, you can enable FortiClient to work with FortiSandbox.

To enable Sandbox Detection:
  1. On the Malware Protection tab, click the settings icon.
  2. If the Administrative privileges are required to change settings. Press Elevate to obtain these privileges. message displays, click Elevate.

    The settings page displays.

  3. Toggle Sandbox Detection on if needed.
  4. In the IP box, type the IP address for FortiSandbox, and click Test to ensure the IP address is valid.

    If the IP address is valid, a confirmation dialog box displays.

  5. Click OK to close the confirmation dialog box.

    For information about configuring FortiSandbox, see Configuring Sandbox Detection.

    FortiSandbox Detection is enabled.