Version:

Version:


Table of Contents

Cookbook

Download PDF
Copy Link

Configuring an LDAP server with zero trust tunnel enabled on FortiAuthenticator

To configure an LDAP server:
  1. Go to Authentication > Remote Auth. Servers > LDAP, and select Create New.
  2. In Create New LDAP server:
    1. In Name, enter a name.
    2. Enable Use Zero Trust tunnel and from the dropdown select a zero trust tunnel.
    3. In Primary Server IP, enter the IP address of the server.
    4. In Port, enter the port number.
    5. In Base distinguished name, enter a base distinguished name.
    6. In Bind Type, select Regular.

      Enter the username and password for the LDAP user.

  3. Click OK.

Configuring an LDAP server with zero trust tunnel enabled on FortiAuthenticator

To configure an LDAP server:
  1. Go to Authentication > Remote Auth. Servers > LDAP, and select Create New.
  2. In Create New LDAP server:
    1. In Name, enter a name.
    2. Enable Use Zero Trust tunnel and from the dropdown select a zero trust tunnel.
    3. In Primary Server IP, enter the IP address of the server.
    4. In Port, enter the port number.
    5. In Base distinguished name, enter a base distinguished name.
    6. In Bind Type, select Regular.

      Enter the username and password for the LDAP user.

  3. Click OK.