Version:


Table of Contents

6.1.0
Download PDF
Copy Link

Launching the FortiAuthenticator-VM instance

  1. In OCI go to Core Infrastructure > Compute > Custom Images, and click the previously imported image.

    See Importing the image.

  2. Click Create Instance.

  3. On the Create Compute Instance page:
    1. In the Name your instance field, name the instance.
    2. In the Configure networking section, configure the network.

      Note

      The Subnet must be a public network reachable using an SSH client and web browser.

  4. Once the instance is Running:
    1. From the side-menu, select Attached Block Volumes (0).
    2. Click Attach Block.

  5. On the Attach Block Volume page, select the following options, and click Attach:
    • PARAVIRTUALIZED
    • READ/WRITE
    • The previously created BLOCK VOLUME

  6. Wait for the block volume to reach the Attached state, then click Reboot to restart the FortiAuthenticator-VM.

Launching the FortiAuthenticator-VM instance

  1. In OCI go to Core Infrastructure > Compute > Custom Images, and click the previously imported image.

    See Importing the image.

  2. Click Create Instance.

  3. On the Create Compute Instance page:
    1. In the Name your instance field, name the instance.
    2. In the Configure networking section, configure the network.

      Note

      The Subnet must be a public network reachable using an SSH client and web browser.

  4. Once the instance is Running:
    1. From the side-menu, select Attached Block Volumes (0).
    2. Click Attach Block.

  5. On the Attach Block Volume page, select the following options, and click Attach:
    • PARAVIRTUALIZED
    • READ/WRITE
    • The previously created BLOCK VOLUME

  6. Wait for the block volume to reach the Attached state, then click Reboot to restart the FortiAuthenticator-VM.