Monitoring wireless clients
To view connected clients on a FortiGate or FortiWiFi unit
- Go to Monitor > WiFi Client Monitor.
The following information is displayed on both the FortiGate and FortiWiFi units, unless otherwise specified:
SSID |
The SSID that the client is connected to. |
FortiAP |
The serial number of the FortiAP unit to which the client connected. |
User |
The user name associated with the device. |
IP |
The IP address assigned to the wireless client. |
MAC Address |
The MAC address of the device. Note: This column is available on the FortiGate only. |
Device |
|
Channel |
WiFi radio channel in use. |
Bandwidth Tx/Rx |
Client received and transmitted bandwidth, in Kbps. |
Signal Strength / Noise |
The signal-to-noise ratio in decibels calculated from signal strength and noise level. |
Signal Strength |
|
Association Time |
How long the client has been connected to this access point. |
Results can be filtered. Select the filter icon on the column you want to filter. Enter the values to include. If you want to exclude values, specify them and also select NOT.