This section highlights some of the operational changes that administrators should be aware of in FortiAnalyzer version 7.0.4.
FortiAnalyzer 7.0.1 docker image is available for download from Fortinet’s Verified Publisher public repository on dockerhub.
- Go to dockerhub at https://hub.docker.com/.
The dockerhub home page is displayed.
- In the banner, click Explore.
- In the search box, type Fortinet, and press Enter.
The fortinet/fortimanager and fortinet/fortianalyzer options are displayed.
- Click fortinet/fortianalyzer.
The fortinet/fortianalyzer page is displayed, and two tabs are available: Overview and Tags. The Overview tab is selected by default.
- On the Overview tab, copy the docker pull command, and use it to download the image.
The CLI command from the Overview tab points to the latest available image. Use the Tags tab to access different versions when available.
FortiAnalyzer does not support logs from the following models when they have hyperscale firewall mode and netflow enabled:
FortiAnalyzer only supports logs when the normal firewall mode with standard FortiGate logging are enabled.
Starting in verion 7.0.1, the CLI to modify the interface status has been changed from
config system interface
set status <enable/disable>
Citrix XenServer limits ramdisk to 128M by default. However the FAZ-VM64-XEN image is larger than 128M. Before updating to FortiAnalyzer 6.4, increase the size of the ramdisk setting on Citrix XenServer.
- On Citrix XenServer, run the following command:
xenstore-write /mh/limits/pv-ramdisk-max-size 536,870,912
- Confirm the setting is in effect by running
limits = ""
pv-kernel-max-size = "33554432"
pv-ramdisk-max-size = "536,870,912"
boot-time = ""
- Remove the pending files left in
The ramdisk setting returns to the default value after rebooting.
When upgrading FortiAnalyzer VM units from FortiAnalyzer 6.2.x to FortiAnalyzer 6.4.0 and later, the upgrade may fail because of memory allocation.
Workaround: Before upgrading FortiAnalyzer VM to FortiAnalyzer 6.4.0 and later, change the memory allocation to 8 GB of RAM.
FortiAnalyzer hardware devices and VMs display a warning when the maximum number of ADOMs is reached or exceeded. The platform does not enforce the limit; however, adding more ADOMs may affect the performance of the unit. For more details, see Appendix A - Default and maximum number of ADOMs supported.
Port 8443 is reserved for https-logging from FortiClient EMS for Chromebooks. See also FortiAnalyzer 7.0 Ports Reference on the Docs Library.
A Hyper-V FAZ-VM running on a PC with an AMD CPU may experience a kernel panic. Fortinet recommends running VMs on an Intel-based PC.
Due to known vulnerabilities in the SSLv3 protocol, FortiAnalyzer-VM64-AWS only enables TLSv1 by default. All other models enable both TLSv1 and SSLv3. If you wish to disable SSLv3 support, please run:
config system global
set ssl-protocol t1sv1