Fortinet black logo

CLI Reference

fwm-setting

fwm-setting

Use this command to configure firmware management settings.

Syntax

config fmupdate fwm-setting

set auto-scan-fgt-disk {enable | disable}

set check-fgt-disk {enable | disable}

set fds-failover-fmg {enable | disable}

set fds-image-timeout <integer>

set immx-source {cloud | fgt | fmg}

set log {fwm | fwm_dm | fwm_dm_json}

set multiple-steps-interval <integer>

end

Variable

Description

auto-scan-fgt-disk {enable | disable}

Enable/disable automatic scanning of a FortiGate disk when required (default = enable).

check-fgt-disk {enable | disable}

Enable/disable checking a FortiGate disk prior to upgrading the image (default = enable).

fds-failover-fmg {enable | disable}

Enable/disable using the a local image file on the FortiManager when the FDS download fails (default = enable).

fds-image-timeout <integer>

Set the timer for FortiGate image downloads from FortiGuard, in seconds (300 - 3600, default = 1800).

immx-source {cloud | fgt | fmg}

Configure which of the IMMX file to be used for choosing the upgrade patch:

  • cloud: Use the IMMX file for FortiCloud.
  • fgt: Use the IMMX file for FortiGate.
  • fmg: Use the IMMX file for FortiManager.

The default file is the one for FortiManager (default = fmg).

log {fwm | fwm_dm | fwm_dm_json}

Configure log setting for the firmware manager daemon (default = fwm_dm):

fwm: Firmware Manager daemon log.

fwm_dm: Firmware Manager and deployment service log.

fwm_dm_json: Firmware Manager and Deployment service log with JSON data between FortiManager-FortiGate.

multiple-steps-interval <integer>

Set the waiting time between multiple step upgrades, in seconds (30 - 180, default = 60).

fwm-setting

Use this command to configure firmware management settings.

Syntax

config fmupdate fwm-setting

set auto-scan-fgt-disk {enable | disable}

set check-fgt-disk {enable | disable}

set fds-failover-fmg {enable | disable}

set fds-image-timeout <integer>

set immx-source {cloud | fgt | fmg}

set log {fwm | fwm_dm | fwm_dm_json}

set multiple-steps-interval <integer>

end

Variable

Description

auto-scan-fgt-disk {enable | disable}

Enable/disable automatic scanning of a FortiGate disk when required (default = enable).

check-fgt-disk {enable | disable}

Enable/disable checking a FortiGate disk prior to upgrading the image (default = enable).

fds-failover-fmg {enable | disable}

Enable/disable using the a local image file on the FortiManager when the FDS download fails (default = enable).

fds-image-timeout <integer>

Set the timer for FortiGate image downloads from FortiGuard, in seconds (300 - 3600, default = 1800).

immx-source {cloud | fgt | fmg}

Configure which of the IMMX file to be used for choosing the upgrade patch:

  • cloud: Use the IMMX file for FortiCloud.
  • fgt: Use the IMMX file for FortiGate.
  • fmg: Use the IMMX file for FortiManager.

The default file is the one for FortiManager (default = fmg).

log {fwm | fwm_dm | fwm_dm_json}

Configure log setting for the firmware manager daemon (default = fwm_dm):

fwm: Firmware Manager daemon log.

fwm_dm: Firmware Manager and deployment service log.

fwm_dm_json: Firmware Manager and Deployment service log with JSON data between FortiManager-FortiGate.

multiple-steps-interval <integer>

Set the waiting time between multiple step upgrades, in seconds (30 - 180, default = 60).