Use the Edit Device page to edit information about a device. The information and options available on the Edit Device page depend on the device type, firmware version, and which features are enabled.
- Go to Device Manager and click Show All in the toolbar.
- In the content pane, select the device or model device and click Edit, or right-click on the device and select Edit. The Edit Device pane displays.
- Edit the device settings and click OK.
Change the name of the device.
Type a description of the device.
Change the IP address.
Displays the serial number of the device.
Displays the firmware version of the device.
Change the administrator user name for the device.
Change the administrator user password for the device.
Select to identify the device as part of an HA cluster, and to identify the other device in the cluster by selecting them from the drop-down list, or by inputting their serial numbers.
Displays default and custom meta fields for the device. Optional meta fields can be left blank, but required meta fields must be defined.
See also Setting values for required meta fields.
Optionally, enter the company or organization information.
Optionally, enter the contact email.
Contact Phone Number
Optionally, enter the contact phone number.
Optionally, enter the address where the device is located.
Log Rate History (Last 24 Hours)
Displays the device's log rate history for the past 24 hours.
Optionally, type a location or geographical coordinate to locate the device on the map.