Fortinet white logo
Fortinet white logo

Administration Guide

Creating administrators

Creating administrators

To create a new administrator account, you must be logged in to an account with sufficient privileges, or as a super user administrator.

You need the following information to create an account:

  • Which authentication method the administrator will use to log in to the FortiAnalyzer unit. Local, remote, and Public Key Infrastructure (PKI) authentication methods are supported.
  • What administrator profile the account will be assigned, or what system privileges the account requires.
  • If ADOMs are enabled, which ADOMs the administrator will require access to.
  • If using trusted hosts, the trusted host addresses and network masks.

For remote or PKI authentication, the authentication must be configured before you create the administrator. See Authentication for details.

To create a new administrator:
  1. Go to System Settings > Admin > Administrators.
  2. In the toolbar, click Create New to display the New Administrator pane.

  3. Configure the following settings, and then click OK to create the new administrator.

    User Name

    Enter the name of the administrator will use to log in.

    Avatar

    Apply a custom image to the administrator.

    Click Add Photo to select an image already loaded to the FortiAnalyzer, or to load an new image from the management computer.

    If no image is selected, the avatar will use the first letter of the user name.

    Comments

    Optionally, enter a description of the administrator, such as their role, location, or the reason for their account.

    Admin Type

    Select the type of authentication the administrator will use when logging into the FortiAnalyzer unit. One of: LOCAL, RADIUS, LDAP, TACACS+, PKI, or Group. See Authentication for more information.

    Server or Group

    Select the RADIUS server, LDAP server, TACACS+ server, or group, as required.

    The server must be configured prior to creating the new administrator.

    This option is not available if the Admin Type is LOCAL or PKI.

    Match all users on remote server

    Select this option to set the password as a wildcard.

    This option is not available if the Admin Type is LOCAL or PKI.

    Subject

    Enter a comment for the PKI administrator.

    This option is only available if the Admin Type is PKI.

    CA

    Select the CA certificate from the dropdown list.

    This option is only available if the Admin Type is PKI.

    Required two-factor authentication

    Select to enable two-factor authentication.

    This option is only available if the Admin Type is PKI.

    New Password

    Enter the password.

    This option is not available if Wildcard is selected.

    If the Admin Type is PKI, this option is only available when Require two-factor authentication is selected.

    If the Admin Type is RADIUS, LDAP, or TACACS+, the password is only used when the remote server is unreachable.

    Confirm Password

    Enter the password again to confirm it.

    This option is not available if Wildcard is selected.

    If the Admin Type is PKI, this option is only available when Require two-factor authentication is selected.

    Force this administrator to change password upon next log on.

    Force the administrator to change their password the next time that they log in to the FortiAnalyzer.

    This option is only available if Password Policy is enabled in Admin Settings. See Password policy.

    Admin Profile

    Select an administrator profile from the list. The profile selected determines the administrator’s access to the FortiAnalyzer unit’s features. See Administrator profiles.

    Administrative Domain

    Choose the ADOMs this administrator will be able to access.

    • All ADOMs: The administrator can access all the ADOMs.
    • All ADOMs except specified ones: The administrator cannot access the selected ADOMs.
    • Specify: The administrator can access the selected ADOMs. Specifying the ADOM shows the Specify Device Group to Access check box. Select the Specify Device Group to Access check box and select the Device Group this administrator is allowed to access. The newly created administrator will only be able to access the devices within the Device Group and sub-groups.

    If the Admin Profile is Super_User, then this setting is All ADOMs.

    This field is available only if ADOMs are enabled. See Administrative Domains.

    Trusted Hosts

    Optionally, turn on trusted hosts, then enter their IP addresses and netmasks. Up to ten IPv4 and ten IPv6 hosts can be added.

    See Trusted hosts for more information.

    Meta Fields

    Optionally, enter the new administrator's email address and phone number.

    Advanced Options

    Configure advanced options, see Advanced options below.

    For more information on advanced options, see the FortiAnalyzer CLI Reference.

    Advanced options

    Option

    Description

    Default

    change-password Enable or Disable changing password.

    disable

    ext-auth-accprofile-override Enable or Disable overriding the account profile by administrators configured on a Remote Authentication Server.

    disable

    ext-auth-adom-override Enable or Disable overriding the ADOM by administrators configured on a Remote Authentication Server.

    disable

    ext-auth-group-match Specify the group configured on a Remote Authentication Server.

    -

    first-name Specify the first name.

    -

    last-name Specify the last name.

    -

    mobile-number Specify the mobile number.

    -

    pager-number Specify the pager number.

    -

    restrict-access Enable or Disable restricted access.

    disable

    rpc-permit Select the RPC permit.

    none

Creating administrators

Creating administrators

To create a new administrator account, you must be logged in to an account with sufficient privileges, or as a super user administrator.

You need the following information to create an account:

  • Which authentication method the administrator will use to log in to the FortiAnalyzer unit. Local, remote, and Public Key Infrastructure (PKI) authentication methods are supported.
  • What administrator profile the account will be assigned, or what system privileges the account requires.
  • If ADOMs are enabled, which ADOMs the administrator will require access to.
  • If using trusted hosts, the trusted host addresses and network masks.

For remote or PKI authentication, the authentication must be configured before you create the administrator. See Authentication for details.

To create a new administrator:
  1. Go to System Settings > Admin > Administrators.
  2. In the toolbar, click Create New to display the New Administrator pane.

  3. Configure the following settings, and then click OK to create the new administrator.

    User Name

    Enter the name of the administrator will use to log in.

    Avatar

    Apply a custom image to the administrator.

    Click Add Photo to select an image already loaded to the FortiAnalyzer, or to load an new image from the management computer.

    If no image is selected, the avatar will use the first letter of the user name.

    Comments

    Optionally, enter a description of the administrator, such as their role, location, or the reason for their account.

    Admin Type

    Select the type of authentication the administrator will use when logging into the FortiAnalyzer unit. One of: LOCAL, RADIUS, LDAP, TACACS+, PKI, or Group. See Authentication for more information.

    Server or Group

    Select the RADIUS server, LDAP server, TACACS+ server, or group, as required.

    The server must be configured prior to creating the new administrator.

    This option is not available if the Admin Type is LOCAL or PKI.

    Match all users on remote server

    Select this option to set the password as a wildcard.

    This option is not available if the Admin Type is LOCAL or PKI.

    Subject

    Enter a comment for the PKI administrator.

    This option is only available if the Admin Type is PKI.

    CA

    Select the CA certificate from the dropdown list.

    This option is only available if the Admin Type is PKI.

    Required two-factor authentication

    Select to enable two-factor authentication.

    This option is only available if the Admin Type is PKI.

    New Password

    Enter the password.

    This option is not available if Wildcard is selected.

    If the Admin Type is PKI, this option is only available when Require two-factor authentication is selected.

    If the Admin Type is RADIUS, LDAP, or TACACS+, the password is only used when the remote server is unreachable.

    Confirm Password

    Enter the password again to confirm it.

    This option is not available if Wildcard is selected.

    If the Admin Type is PKI, this option is only available when Require two-factor authentication is selected.

    Force this administrator to change password upon next log on.

    Force the administrator to change their password the next time that they log in to the FortiAnalyzer.

    This option is only available if Password Policy is enabled in Admin Settings. See Password policy.

    Admin Profile

    Select an administrator profile from the list. The profile selected determines the administrator’s access to the FortiAnalyzer unit’s features. See Administrator profiles.

    Administrative Domain

    Choose the ADOMs this administrator will be able to access.

    • All ADOMs: The administrator can access all the ADOMs.
    • All ADOMs except specified ones: The administrator cannot access the selected ADOMs.
    • Specify: The administrator can access the selected ADOMs. Specifying the ADOM shows the Specify Device Group to Access check box. Select the Specify Device Group to Access check box and select the Device Group this administrator is allowed to access. The newly created administrator will only be able to access the devices within the Device Group and sub-groups.

    If the Admin Profile is Super_User, then this setting is All ADOMs.

    This field is available only if ADOMs are enabled. See Administrative Domains.

    Trusted Hosts

    Optionally, turn on trusted hosts, then enter their IP addresses and netmasks. Up to ten IPv4 and ten IPv6 hosts can be added.

    See Trusted hosts for more information.

    Meta Fields

    Optionally, enter the new administrator's email address and phone number.

    Advanced Options

    Configure advanced options, see Advanced options below.

    For more information on advanced options, see the FortiAnalyzer CLI Reference.

    Advanced options

    Option

    Description

    Default

    change-password Enable or Disable changing password.

    disable

    ext-auth-accprofile-override Enable or Disable overriding the account profile by administrators configured on a Remote Authentication Server.

    disable

    ext-auth-adom-override Enable or Disable overriding the ADOM by administrators configured on a Remote Authentication Server.

    disable

    ext-auth-group-match Specify the group configured on a Remote Authentication Server.

    -

    first-name Specify the first name.

    -

    last-name Specify the last name.

    -

    mobile-number Specify the mobile number.

    -

    pager-number Specify the pager number.

    -

    restrict-access Enable or Disable restricted access.

    disable

    rpc-permit Select the RPC permit.

    none