Fortinet black logo

Preparing a Deployment

6.0.0
Copy Link
Copy Doc ID 94188d5c-1da1-11e9-b86b-00505692583a:148633

Preparing a Deployment

The deployment step mentioned in this guide assumes that you have already created a VCN and relevant network resources such as route tables and subnets. You must also configure a Security List so that you can access FortiAnalyzer over the Internet while closing unnecessary ports. See below:

You will at least need to open TCP port 443 to allow incoming access to FortiAnalyzer's management GUI console (or port 22 for SSH if you are familiar with the FortiAnalyzer command line interface) for initial configuration. See FortiAnalyzer open ports.

Preparing a Deployment

The deployment step mentioned in this guide assumes that you have already created a VCN and relevant network resources such as route tables and subnets. You must also configure a Security List so that you can access FortiAnalyzer over the Internet while closing unnecessary ports. See below:

You will at least need to open TCP port 443 to allow incoming access to FortiAnalyzer's management GUI console (or port 22 for SSH if you are familiar with the FortiAnalyzer command line interface) for initial configuration. See FortiAnalyzer open ports.