Fortinet Document Library

Version:


Table of Contents

1.2.0
Download PDF
Copy Link

Introduction

You can access the FortiAI CLI (Command Line Interface) using the FortiAI console or using an SSH or TELNET client. These services must be enabled on the port1 interface.

CLI commands are intended to be used for initial device configuration and troubleshooting. Some commands are specific to hardware or VM devices. Use ? with the command for information on how to use the command.

The FortiAI CLI is case-sensitive.

Introduction

You can access the FortiAI CLI (Command Line Interface) using the FortiAI console or using an SSH or TELNET client. These services must be enabled on the port1 interface.

CLI commands are intended to be used for initial device configuration and troubleshooting. Some commands are specific to hardware or VM devices. Use ? with the command for information on how to use the command.

The FortiAI CLI is case-sensitive.