Configuring pre-login disclaimer messages
Customize disclaimer messages to show before the user reaches the login page.
To configure the pre-login disclaimer in the GUI:
- Go to System > Replacement Messages.
- In the Pre-login Disclaimer Message tab, edit the message.
- Click Save.
Enable the pre-login banner
The pre-login banner needs to be enabled to show the pre-login disclaimer messages.
To enable the pre-login banner in the GUI:
- Go to System > Settings.
- In the Basic tab, enable Pre Login Banner.
- Click Save.
To enable the pre-login banner in the CLI:
config system global
set pre-login-banner enable
end