Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Handbook

OCI Connector

When you create an OCI connector, you are authorizing FortiADC to periodically (default 30s) get information of OCI instances and dynamically populates it in server pool configuration.

To create an OCI Connector:

  1. Go to Security Fabric > External Connectors.
  2. Click Create New.
  3. Under Public SDN, select OCI. The OCI screen is displayed.
  4. Configure the following options, and then click Save.
    Name Type a name for the external connector object.
    Status

    Toggle on to enable the external connector object.

    Toggle off to disable the external connector object.

    Update Interval (s)

    Specify the update interval for the connector to get OCI objects and dynamically populates the information in the server pool configuration.

    OCI region type

    Specify the OCI region type.

    OCI region

    Specify the OCI region where your compute instances are located.

    User ID

    The user ID to log in to OCI.

    Tenant ID

    The tenant ID to log in to OCI.

    Compartment ID

    The Compartment ID in which your compute instances are deployed.

    Certificate

    The certificate that FortiADC uses to build connections with OCI.

    OCI HA status

    Enable this option if your OCI instances are deployed in HA mode.

    Use Metadata IAM

    When FortiADC is deployed on OCI, you can assign IAM role for it to access OCI objects.

After the connector is created, you can select this connector when creating a server pool. FortiADC will then get the IP addresses of the compute instances from OCI and dynamically populates the objects in server pool configuration, as shown in the following screenshots.

You can use the IP Address Type option to get the private address or public address of the instances. This option is supported only when FortiADC is deployed on OCI.

 

OCI Connector

When you create an OCI connector, you are authorizing FortiADC to periodically (default 30s) get information of OCI instances and dynamically populates it in server pool configuration.

To create an OCI Connector:

  1. Go to Security Fabric > External Connectors.
  2. Click Create New.
  3. Under Public SDN, select OCI. The OCI screen is displayed.
  4. Configure the following options, and then click Save.
    Name Type a name for the external connector object.
    Status

    Toggle on to enable the external connector object.

    Toggle off to disable the external connector object.

    Update Interval (s)

    Specify the update interval for the connector to get OCI objects and dynamically populates the information in the server pool configuration.

    OCI region type

    Specify the OCI region type.

    OCI region

    Specify the OCI region where your compute instances are located.

    User ID

    The user ID to log in to OCI.

    Tenant ID

    The tenant ID to log in to OCI.

    Compartment ID

    The Compartment ID in which your compute instances are deployed.

    Certificate

    The certificate that FortiADC uses to build connections with OCI.

    OCI HA status

    Enable this option if your OCI instances are deployed in HA mode.

    Use Metadata IAM

    When FortiADC is deployed on OCI, you can assign IAM role for it to access OCI objects.

After the connector is created, you can select this connector when creating a server pool. FortiADC will then get the IP addresses of the compute instances from OCI and dynamically populates the objects in server pool configuration, as shown in the following screenshots.

You can use the IP Address Type option to get the private address or public address of the instances. This option is supported only when FortiADC is deployed on OCI.