Fortinet black logo

Handbook

Configuring health check monitor

Monitoring health check status

FortiADC enables you to monitor the health of server in real time directly from your desktop, as described below.

  1. Click Shared Resources > Health Check.
  2. Click the Health Check Monitor tab.
  3. Configure the health check monitor as described in Checking server health.
  4. Click Start to perform the health check. The result will show in the Monitor Information.

Checking server health

Parameter Description

IP Address

Enter the IP address of the remote server.

Health Check

Select the health check configuration.

Port

Enter the port number, if applicable. Note: This field is available only for health check configurations that require port numbers.

Monitoring health check status

FortiADC enables you to monitor the health of server in real time directly from your desktop, as described below.

  1. Click Shared Resources > Health Check.
  2. Click the Health Check Monitor tab.
  3. Configure the health check monitor as described in Checking server health.
  4. Click Start to perform the health check. The result will show in the Monitor Information.

Checking server health

Parameter Description

IP Address

Enter the IP address of the remote server.

Health Check

Select the health check configuration.

Port

Enter the port number, if applicable. Note: This field is available only for health check configurations that require port numbers.