Fortinet black logo

VM Installation Guide

Installation overview

5.3.0
Copy Link
Copy Doc ID 96c7833d-d34d-11e9-8977-00505692583a:582453
Download PDF

Installation overview

The diagram below overviews the process for installing FortiADC-VM on Citrix XenServer, which is described in the subsequent text.

Basic steps for installing FortiADC-VM (Citrix XenServer)

Resize boot disk

Before you upgrade the image to v5.1.0, increase the size of the boot disk to 2 GB.

The size of the boot disk was less than 2G before v5.1.0. If you deploy an ADC after v5.1.0, boot disk is 2GB by default.

How to resize the bootdisk for Xen-Server:

1. Power off the ADC

2. Go to Storage > Hard disk 1 > Properties > Size and Location

3. Change the size accordingly. If you are upgrading to 5.1.x, make sure you select a bootdisk size of at least 2 GB.

Installation overview

The diagram below overviews the process for installing FortiADC-VM on Citrix XenServer, which is described in the subsequent text.

Basic steps for installing FortiADC-VM (Citrix XenServer)

Resize boot disk

Before you upgrade the image to v5.1.0, increase the size of the boot disk to 2 GB.

The size of the boot disk was less than 2G before v5.1.0. If you deploy an ADC after v5.1.0, boot disk is 2GB by default.

How to resize the bootdisk for Xen-Server:

1. Power off the ADC

2. Go to Storage > Hard disk 1 > Properties > Size and Location

3. Change the size accordingly. If you are upgrading to 5.1.x, make sure you select a bootdisk size of at least 2 GB.