Fortinet black logo

Deploying FortiADC-VM on Xen Project

Copy Link
Copy Doc ID 6def81c4-5370-11ea-9384-00505692583a:863052
Download PDF

Deploying FortiADC-VM on Xen Project

This chapter provides procedures for FortiADC-VM on Xen Project. It includes the following information:

Before upgrading the image to v5.1.0, increase the size of the bootdisk.img to 2 GB.

The size of the bootdisk.img was less than 2G before v5.1.0. If you deploy an ADC after v5.1.0, bootdisk.img is 2GB by default.

How to resize the boot disk
  1. Power off the ADC
  2. Go to KVM host machine, entering the ADC installation directory.
  3. Execute the following command: qemu-img resize bootdisk.img +1G

Deploying FortiADC-VM on Xen Project

This chapter provides procedures for FortiADC-VM on Xen Project. It includes the following information:

Before upgrading the image to v5.1.0, increase the size of the bootdisk.img to 2 GB.

The size of the bootdisk.img was less than 2G before v5.1.0. If you deploy an ADC after v5.1.0, bootdisk.img is 2GB by default.

How to resize the boot disk
  1. Power off the ADC
  2. Go to KVM host machine, entering the ADC installation directory.
  3. Execute the following command: qemu-img resize bootdisk.img +1G