Global Repository

The Global Repository collects various firmwares, configurations, templates, etc. Whatever you upload here can be applied in the individual ADC. It is useful if you wish to mass produce certain types of ADC's, say, if you want them all configured in a certain way, you might upload a configuration and then apply it to each ADC.

Firmware

Global Repository > Firmware. Firmware repository shows you the available firmwares that you can apply to the individual ADC. When you upload a firmware here, it will appear in the individual ADC system as an option which you can boot up (see: Individual ADC > System > Firmware.)

See information on upgrading firmware in the handbook.

Version	The version of the firmware
Platform	The platform the firmware is running on
Build Number	The build number of the firmware

Configuration

Global Repository > Configuration. Configuration repository shows you the available configurations that you can apply to the individual ADC. These configurations will appear as options in Individual ADC > System > Configuration > Restore. You can apply them there.

Name	Name of the configuration
Device	Name of the device from which the configuration originates
Time	Time when the configuration was created
Type	The type of the configuration. Full -- will show all the default and hidden items No full option -- will show only the key items, no default settings and no hidden settings Note: There is now only the 'full' option.
User	The user who created the configuration
Version	The ADC version which the configuration is based off of
Platform	The platform the configuration is running on
Build Number	The build number of the configuration

Command

Global Repository > Command. Command repository shows you the available commands that you can apply to the individual ADC. They will appear as options in Individual ADC > System> Command, where you can apply them. See the CLI reference.

Certificate

Global Repository > Certificate. Certificate repository shows you the available certificates that you can apply to the individual ADC. They will appear as options in Individual ADC > System> Certificate, where you can apply them.

Name	Name of the certificate
Subject	The information of this certificate
Type	The encryption type of the certificate RSA ECDSA
Certificate Type	The type of certificate Local CA
Status	Status of the certificate OK Expired Pending

Log

Collects all logs that the ADC's give. You can sort by device (seeing all the logs for only one device) and severity, as well as choose a start/end time for the log.

Device	Name of the device from which the log originates
IP	The IP of the device from which the log originates
Message	The content of the log
Severity	Info Notice Warning Alert Error
Time	Time stamp of the log